[Test Pattern]; [Filter Counter] - Panasonic SOLID SHINE PT-VMZ51 Operating Instructions Manual

[HDMI1 AUDIO IN]
[HDMI2 AUDIO IN]
[DIGITAL LINK AUDIO IN]
[NETWORK AUDIO IN]
*1 Only for HDMI1 input.
*2 Only for HDMI2 input.
*3 Only for DIGITAL LINK input.
*4 Only for NETWORK input.

[TEST PATTERN]

Displays the test pattern built-in to the projector.
The settings such as [CONTRAST] or [BRIGHTNESS] that can be set from the [PICTURE] menu will not be
reflected in the test pattern. Make sure to perform various adjustments with input signals displayed.
1) Press as to select [TEST PATTERN].
2) Press the <ENTER> button.
f The ALL WHITE test pattern is displayed.
3) Press qw to switch the test pattern.
f The test pattern will switch each time you press the button.
All white
Color bar (Vertical)
Color bar (Horizontal)
Cross
Cross (Inversion)
Cross hatch
Note
f If [TEST PATTERN] is assigned to the <FUNCTION> button on the remote control, the all white pattern will be displayed after pressing the
<FUNCTION> button.

[FILTER COUNTER]

This function is used to check the usage time of the air filter or set the cleaning/replacement cycle of the air filter.
Also, you can reset the air filter usage time.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
[FILTER COUNTER]
[TIMER]
[FILTER COUNTER RESET]
Setting [TIMER]
If you want to regularly clean/replace the air filter, set its cycle time. When the air filter usage time reaches the set
time, a message of "FILTER COUNTER has reached the set time" prompting you to clean/replace the air filter is
displayed on the projection screen.
1) Press as to select [FILTER COUNTER].
2) Press the <ENTER> button.
f The [FILTER COUNTER] screen is displayed.
3) Press as to select [TIMER].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1000H] - [20000H]
96 - ENGLISH
Chapter 4 Settings - [PROJECTOR SETUP] menu
Audio input to HDMI1 is output.
*1
Audio input to HDMI2 is output.
*2
Audio input to DIGITAL LINK is output.
*3
Audio input to NETWORK is output.
*4
The test pattern is displayed together with the operation guide of [PATTERN SELECT]. Select your
desired test pattern.
Displays the usage time of the air filter.
Sets the cleaning/replacement cycle of the air filter.
Resets the air filter usage time.
Select not to display the message.
Select to display the message. You can set the cleaning/replacement cycle of the air filter.