Computer Setup - HP Compaq 6000 Install Manual

4-2 Compaq Setup and Diagnostics Software
The Compaq Utilities menu consists of the following choices:

Computer Setup

Use Computer Setup in the following instances:
Computer Setup
Computer Checkup (TEST)
View System Information (INSPECT)
Create a Diagnostics Diskette
Manage Diagnostics Partition
Exit from this Utility
To verify configuration parameters when resolving problems.
To get an overview of the workstation's hardware.
To modify settings for graphics, processor, memory, audio, storage,
communications, and input devices.
To enable or disable removable media drive boot ability.
To enable or disable removable media drive write control.
To enable or disable the serial or parallel ports.
To resolve errors when a system configuration error is detected during
the Power-On Self-Test (POST) and is not automatically fixed by POST.
To change factory default settings.
To add new options, such as a network interface controller upgrade.
IMPORTANT: Be sure to configure new options and drivers in your
operating system after they have been configured by the Setup utility.