Changing A Setup Password - HP Compaq 6000 Install Manual

3-10 Security Features

Changing a Setup Password

To change the Setup Password:
1.
2.
3.
Completing this procedure causes the new password to take effect the next time
you turn on the workstation.
Turn on the workstation.
When the cursor appears in the upper-right corner of the screen, press
F10.
When the key icon (
or alternate delimiter character, your new password, another slash (/) or
alternate delimiter character, and your new password again as shown:
current password/new password/new password
NOTE: Refer to the "National Keyboard Delimiter Characters" section in this
chapter for information about the alternate delimiter characters.
NOTE: Type carefully; for security reasons, the characters you type do not
appear on the screen.
NOTE: The Setup Password may also be changed by using the Computer
Setup utility. Follow the "Establishing a Setup Password" procedure. Locate
the Setup Password option and follow the instructions to change the Setup
Password.
) appears, type your current password, a slash (/)