Enabling The Keyboard And Mouse Interface; Front Bezel Lock - HP Compaq 6000 Install Manual

Enabling the Keyboard and Mouse Interface

To enable the keyboard and input device connected to the mouse connector,
enter the Power-On Password.
NOTE:
screen. The application will not be affected by the characters typed.

Front Bezel Lock

A keylock on the front bezel secures the bezel to the chassis. It also locks the
removable media door on the bezel and prevents access to the drive cage.
Figure 3-3. Closing and locking the front bezel
For security reasons, the characters you type do not appear on the
CAUTION: If your workstation does not have a Setup Password
enabled, then the ROM is not write-protected. Updates may occur
that could disrupt the operating system. The Setup Password is
disabled when the workstation leaves the factory.
Compaq Professional Workstation 6000 and 8000 Reference Guide
3-17