Fax Tx Report; Density; Manual Send - Kyocera ECOSYS MA2100cfx Operation Manual

Sending Faxes > FAX TX Report

FAX TX Report

You can check whether FAX was transmitted properly by printing the report after transmission.
Item
Off
On
Error Only
NOTE
This setting is displayed if FAX TX Result Reports is set to [Specify Each Job].
Send Result Reports (page 7-4)

Density

Adjust density.
(Value: [Lighter -4] to [Darker +4])

Manual Send

This method allows you to send originals by pressing the [Start] key after confirming that the telephone line has
connected to the receiving system.
NOTE
Connecting a telephone set (commercially available product) to this machine enables you to talk with the person at the
receiving system before sending originals.
Manual Send (page 5-33)
1
2
3
4
5
Does not print reports.
Prints reports.
Prints reports only if an error occurs.
Select the [FAX] key.
Place the originals.
Select the [On Hook] key.
Use the numeric keys to enter the number of the receiving system.
NOTE
To cancel the operation, select [Line Off].
Press the [Start] key.
When you hear the fax tone, the telephone line has connected to the receiving system.
Press the [Start] key. Transmission begins.
Description
3-21