Kyocera ECOSYS MA2100cfx Operation Manual page 152

Fax Settings > Default fax settings
Item
Duplex Printing
ECM RX
RX Start Speed
TX/RX Restriction
This function allows you to send or receive originals only when communication requirements are met.
Transmission Restriction (page 8-10)
Select Key Set. (Select Key Settings)
If you register a function to the Left Select key or Right Select key, you can quickly set the function when using fax functions.
Item
Left
Right
Dest. Entry(FAX)
Item
Dest. Entry(FAX)
When received multiple pages of data are the same width, they can be printed out on both
sides of paper having the same width as the data.
Value: Off, On
Duplex Printing (page 4-7)
Set whether ECM RX is performed.
ECM is a communication mode specified by the ITU-T (International Telecommunication Union)
that retransmits data when an error occurs. Fax machines that have ECM mode check for
errors as they communicate, preventing distortion of the image due to noise on the line and
other conditions.
Value: On, Off
NOTE
When there is a large amount of noise on the line, communication may take slightly longer than
when [Off] is selected.
Change the RX Start Speed.
When communication conditions are bad, the fax may not be received correctly. In that case,
set a lower RX Start Speed.
Value: 9600bps, 14400bps, 33600bps
NOTE
Normally this should be used with the default setting.
You can register one of the following functions to each key.
Value: None, Original Size, Original Image, FAX Resolution, Orig.Orientation, Continuous
Scan, File Name Entry, JobFinish Notice, FAX Delayed TX, FAX Direct TX, FAX RX Polling,
FAX TX Report, Density
NOTE
[FAX TX Report] is displayed when [FAX TX Result] is set to [Specify Each Job].
Send Result Reports (page 7-4)
Select whether to permit direct entry of destination. When this option is set to [Prohibit],
you cannot enter the destination directly.
Value: Permit, Prohibit
NOTE
If [Prohibit] is set for new destination entry in [Send] in system menu, this option cannot be set.
Description
Description
Description
8-9