System Menus - Panasonic AJ-HD1700PE Operating Instructions Manual

System menus

No./Item
00 This enables one of a number of different signals
to be output from the VIDEO OUT 2 output
WFM SEL connector.
0000 CTL:
0001 TC:
0002 VIDEO:
0003 RF_L:
0004 RF_R:
0005 ENV_L:
0006 ENV_R:
<Notes>
• The setting can be changed at any time without
being affected by the system menu item No.30
(MENU LOCK) setting.
• The output signals during normal playback
virtually maintain the levels given below.
CTL: 0.1 to.3Vp-p
VIDEO: 1.0Vp-p
05 For setting whether to perform the various
adjustments for the video output signals using this
ENCODER VTR or using an external encoder remote
SEL controller.
0000 REMOTE:
The various adjustments for the video output
signals are performed by an external encoder
remote controller.
0001 LOCAL:
The various adjustments for the video output
signals are performed using this VTR.
0002 BOTH:
The various adjustments for the video output
signals are performed using both this VTR and
an external encoder remote controller.
06 For selecting what is to be controlled when
the video output level is to be adjusted by an
V LEVEL external encoder remote controller.
CTRL 0000 HD:
The HD video output level can be adjusted.
0001 SD:
The SD video output level can be adjusted.
0002 BOTH:
Both the HD and SD video output levels can be
adjusted.
The underlining (__) denotes the factory setting mode.
78
Description of setting
The CTL signal is output.
The time code signal is output.
The video output signal is output.
The PB L RF signal is output.
The PB R RF signal is output.
The PB L ENV signal is output.
The PB L ENV signal is output.
TC: 0.6Vp-p
Video output signal adjustments
The control matrix for the adjustments is shown in the table below.
When "CMPNT" has been selected as the setup menu item
No.650 (STYLE) setting
Setting
05: 06: 653: Y LVL (HD)
ENCODER V LEVEL 654: Pb LVL (HD)
SEL CTRL 655: Pr LVL (HD)
656: BK LVL (HD)
REMOTE HD External encoder
remote controller
SD
No adjustments
possible
BOTH External encoder
remote controller
LOCAL HD
SD
AJ-HD1700
BOTH
BOTH HD External encoder remote
controller/AJ-HD1700
SD
AJ-HD1700
BOTH External encoder remote
controller/AJ-HD1700
External encoder remote controller: Only adjustments of the
external encoder remote controller are performed.
AJ-HD1700: Only adjustments of the setup menu items are
performed.
External encoder remote controller/AJ-HD1700: Adjustments can
be performed from both the external encoder remote controller and
setup menus.
<Note>
Use the AJ-ER50, an optional accessory, as the external encoder
remote controller. However, its VIDEO PHASE and SYNC PHASE
controls will not work.
When "CMPST" has been selected as the setup menu item
No.650 (STYLE) setting
Setting
05: 06: 662: V LEVEL
ENCODER V LEVEL 663: C LEVEL
SEL CTRL 664: HUE ( or C PHASE)
665: SETUP LVL (or BK LVL)
REMOTE HD
External encoder remote
SD
controller
BOTH
LOCAL HD
SD AJ-HD1700
BOTH
BOTH HD
External encoder remote
SD
controller/AJ-HD1700
BOTH
External encoder remote controller: Only adjustments of the external
encoder remote controller are performed.
AJ-HD1700: Only adjustments of the setup menu items are performed.
External encoder remote controller/AJ-HD1700: Adjustments can be
performed from both the external encoder remote controller and setup
menus.
<Note>
Use the MT-200 (manufactured by Musashi and recommended by
Panasonic) as the external encoder remote controller. However, its
VIDEO PHASE, SYNC PHASE and SC PHASE controls will not work.
Adjustment item
658: Y LVL (SD)
659: Pb LVL (SD)
660: Pr LVL (SD)
661: BK LVL (SD)
No adjustments
possible
External encoder
remote controller
External encoder
remote controller
AJ-HD1700
AJ-HD1700
External encoder remote
controller/AJ-HD1700
External encoder remote
controller/AJ-HD1700
Adjustment item