Table of Contents
Advertisement
Parts and Their Functions
Time code display
6
4
3 Time counter display
CTL:
CTL counter data
TCG:
Time code data of time code generator
UBG:
User's bit data of time code generator
tcg:
When the time code data of the time
code generator is preset
ubg:
When the user's bit data of the time
code generator is preset
TCR/T¢R: Time code data of the time code reader
UBR/U¢R: User's bit data of the time code reader
If the time code data or user's bit data could not be
read properly, "T¢R" or "U¢R" appears on the
display and, if the CTL signal is present, the time
code data is supplemented by this signal.
(59/60 Hz mode only)
Drop frame marks:
" : ": Non-drop frame
" . ": Drop frame
Field marks
" ": 1st field
" . ": 2nd field
(These marks are not displayed at any
speed above w0.3k.)
SHIFT
F1
F2
5
TCR 00 : 00 : 00 : 00.
F3
F4
F5
4 Variable memory mode indicator
This is displayed when "ON" has been selected as
the
(VARMEM) setting on the <HOME SHIFT>
F6
menu.
While VM is lighted, variable memory operations
can be performed at any time. (For details, refer to
the "Variable memory function" on page 36.)
5 Back page menu indicator
6 Function button operation inhibited indicator
This is displayed when the
while the
button is held down. When it appears,
F
the operation of the function buttons can be
inhibited. When the
while the
button is held down, the display is
F
cleared, and it becomes possible to operate the
function buttons.
3
F6
button is pressed
BS
button is pressed again
BS
17
Advertisement
Table of Contents
