Tape Operation; Vhs Index Search System - Panasonic Omnivision PV-9455S Operating Instructions Manual

Таре Operation
VHS Index Search System
Each time recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program
index and information are also included. These index marks can be used to access or scan recordings.
Direct Access (For normal and /or timer recordings)
Go directly to desired recording.
Display SELECT SEARCH
INDEX MODE.
CJ Press INDEX.*
* If there are no timer recordings on the
Program Index List, go to step 3.
Display INDEX.
1) Press AY to select.
2) Press > to display.
* This screen appears only if
there are timer recordings.
2 SELECT SEARCH MODE
INDEX SEARCH
PROGRAM INDEX SEARCH
SELECT:A Y KEY
SET z> KEY
END : INDEX KEY
[a getto recording number, INDEX
Select the recording number.
O O б) Press NUMBERED
© © © keys.
• To calculate number,
© S © see below.
Start search.
Press FF or REW.
* When search is
finished, playback
begins.
INDEX SEARCH 04
Ш To Calculate Index Number
Example 1:
If you are watching recording 4 and you want to watch recording 2,
enter 3 in step "3" and press REW.
муу
а. PRECIO E ев
Ехатріе 2:
If you are watching recording 2 and you want to watch recording 6,
enter 4 in step "3" and press FF.
e mE NES ER
il? [з [4 [51 e [7
NOTE: ! indicates start points of each recording.
16
SELECT/
SET
А PLAY
#:5ТОР
> FF
4 FF
NUMBERED
keys
1 INDEX
* Make each entry within 10 seconds, or
the Index Search mode will be canceled.
* If Direct Access or Index Scan is started
very close to an index mark, that index
mark may not be counted in the search.