Panasonic AJ-HD1700PE Operating Instructions Manual page 102

Setup menus
<AUDIO>
(continued)
No./Item
1 For selecting whether the playback level
749*
adjustment controls are to function in the EE
mode when INT SG has been selected on the
AUDIO PB VR
<AUDIO> function menu.
0000 DIS:
0001 ENA:
750 For selecting the signal to be output to analog
output CH1.
0000 CH1:
ANA CH1 SEL
0001 CH5:
751 For selecting the signal to be output to analog
output CH2.
0000 CH2:
ANA CH2 SEL
0001 CH6:
752 For selecting the signal to be output to analog
output CH3.
0000 CH3:
ANA CH3 SEL
0001 CH7:
753 For selecting the signal to be output to analog
output CH4.
0000 CH4:
ANA CH4 SEL
0001 CH8:
754 For selecting the audio CH1 signal to be
superimposed onto the SD SDI output.
SD SDI CH1 0000 CH1:
SL 0001 CH2:
0002 CH3:
0003 CH4:
0004 CH5:
0005 CH6:
0006 CH7:
0007 CH8:
755 For selecting the audio CH2 signal to be
superimposed onto the SD SDI output
SD SDI CH2 0000 CH1:
SL 0001 CH2:
0002 CH3:
0003 CH4:
0004 CH5:
0005 CH6:
0006 CH7:
0007 CH8:
756 For selecting the audio CH3 signal to be
superimposed onto the SD SDI output
SD SDI CH3 0000 CH1:
SL 0001 CH2:
0002 CH3:
0003 CH4:
0004 CH5:
0005 CH6:
0006 CH7:
0007 CH8:
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
The underlining (__) denotes the factory setting mode.
102
Description of setting
The INT SG output level is fixed
at the UNITY level.
The INT SG output level can be
varied using the playback level
adjustment controls.
.
The CH1 signal is output
The CH5 signal is output
.
The CH2 signal is output
.
The CH6 signal is output
.
The CH3 signal is output
.
The CH7 signal is output
.
The CH4 signal is output
.
The CH8 signal is output
The CH1 signal is output.
The CH2 signal is output.
The CH3 signal is output.
The CH4 signal is output.
The CH5 signal is output.
The CH6 signal is output.
The CH7 signal is output.
The CH8 signal is output.
The CH1 signal is output.
The CH2 signal is output.
The CH3 signal is output.
The CH4 signal is output.
The CH5 signal is output.
The CH6 signal is output.
The CH7 signal is output.
The CH8 signal is output.
The CH1 signal is output.
The CH2 signal is output.
The CH3 signal is output.
The CH4 signal is output.
The CH5 signal is output.
The CH6 signal is output.
The CH7 signal is output.
The CH8 signal is output.
No./Item
757 For selecting the audio CH4 signal to be
superimposed onto the SD SDI output
SD SDI CH4 0000 CH1:
SL 0001 CH2:
0002 CH3:
0003 CH4:
0004 CH5:
0005 CH6:
0006 CH7:
0007 CH8:
758 For selecting how to process the digital audio
output slow signals in the JOG, VAR or SHTL
JOG PROC mode.
0000 OFF:
The sound without having the digital audio
output slow signals processed is output even
when the STILL mode is established.
0001 ON:
The sound after having the digital audio output
slow signals processed is output.
759 For selecting the audio output level during DV
format playback.
DV PB ATT 0000 OFF:
The audio output level is not attenuated.
0001 ON:
The audio output level is attenuated.
1 For selecting whether to mute the sound at
760*
the joins between recordings during DV or
DVCAM format playback.
REC PT MUTE
0000 OFF:
0001 ON:
1 For selecting the type of internal signal.
761*
0000 TONE:
0001 SILNCE:
AUDIO INT SG
762 This item enables signals to be recorded and
played back without passing them through
AUD RATE the rate converter in the audio input/output
CON section (without engaging the digital filter).
0000 OFF:
The signals are recorded and played back
without passing them through the rate
converter.
0001 ON:
The signals are recorded and played back after
passing them through the rate converter.
<Notes>
• ON/OFF control is exercised at the same time for
both recording and playback.
differently for recording or playback.
• ON/OFF control is exercised at the same time for
CH1 to CH8.
independently for each channel.
• When the rate converter is set to OFF, the video input
signals and AES (EBU) input signals must be
synchronized. Moreover, the video input signals and
reference signal selected by OUT REF must also be
synchronized. (Noise may occur if these signals are
not synchronized.)
• In the 60 Hz mode, noise may occur if OFF is set for
the rate converter.
Description of setting
The CH1 signal is output.
The CH2 signal is output.
The CH3 signal is output.
The CH4 signal is output.
The CH5 signal is output.
The CH6 signal is output.
The CH7 signal is output.
The CH8 signal is output.
The sound is not muted.
The sound is muted.
A sine wave signal is selected.
A silent signal is selected.
It cannot be set
ON or OFF cannot be set