O Setup Menu/System Menu - Panasonic AJ-HD1700PE Operating Instructions Manual

Function menus
<SETUP MENU/SYSTEM MENU>
When the SETUP MENU or SYSTEM MENU opera-
tion menu is selected, a menu list appears on the
monitor, and the respective items can be set.
SETUP menu
Change mark
SHIFT F1 F2 F3
SYSTEM menu
Change mark
SHIFT F1 F2 F3
Monitor display menu
Item selection cursor
Item number
Category
Item name
Item number
Settings
1.
Selecting the menu items
Select the menu item by turning the ADJ dial.
(The cursor is moved down when the dial is turned
clockwise and up when it is turned counter-
clockwise.)
• Forward or reverse page scrolling (SETUP
menu only)
The menu list is organized by category, and the
pages can be scrolled in the forward or reverse
direction on a category by category basis.
(: PREV),
F1 F2
<Note>
The screen may continue to scroll for a few
moments after the ADJ dial has been turned.
60
F4 F5 F6
F4 F5 F6
Setting number
Setting
(; NEXT)
2.
Changing the settings
1. In the menu item selection status, press the
ADJ dial.
At this time, the setting of the menu item
indicated by the menu item selection cursor
blinks on the monitor.
2. Turn the ADJ dial to select the setting. (Turn it
clockwise to move up through the settings and
counterclockwise to move down through the
settings.)
When the ADJ dial is pressed again, the menu
item selection status is restored.
<Notes>
• Setting items which have submenus
A submenu is opened by pressing the
button. The same operations as the ones
described above are then used to change the
settings.
• Canceling individual items
When (CANCEL) is pressed, the setting
F3
operation is canceled, and the item selection
status is restored.
3.
Entering settings
(After a setting has been entered, the menu
operation is forcibly exited.)
Press (SET) to enter a setting.
F5
4.
Exiting the menu operation
When the (EXIT) button is pressed in the
F6
menu item selection status, the menu operation is
exited, and the original operation screen is
restored.
However, if the (EXIT) button is pressed after
F6
a setting has been changed without that setting
having been entered, a confirmation message will
be displayed.
Confirmation message
Confirmation item
EXIT confirmation
EXIT?
When an attempt has been
F3: CANCEL
made to exit the menu
F5: SET(and EXIT)
operation after a setting has
F6: EXIT(without SET)
been changed without that
setting having been entered
<Note>
The "!" mark appears at the bottom left of the screen
when a setting has been changed.
SHIFT
Description of setting