O Assemble - Panasonic AJ-HD1700PE Operating Instructions Manual

Function menus
<ASSEMBLE>
The ASSEMBLE editing mode is selected on this
menu screen.
IN point
SHIFT F1 F2 F3
Automatic editing and manual editing
• When the editing mode has been selected (the
button is lighted), automatic editing or
ASSEM
manual editing can be performed even after the
ASSEMBLE screen has been exited.
• After the edit IN and OUT points have been
registered (the and
IN
the tape can be prerolled to an IN point or cued up
to an IN or OUT point even after the ASSEMBLE
screen has been exited.
Function Switching
button/item method
F1 Toggle
ASSEM
___
F2
___
___
F3
___
___
F4
___
___
F5
___
___
F6
___
*The underlining (__) denotes the factory setting mode.
58
OUT point
F4 F5 F6
buttons are lighted),
OUT
Corresponding setup
Setting
menu item
___
OFF
ON
___ ___
___ ___
___ ___
___ ___
___ ___
Description of setting
For setting the editing mode to ON or OFF.
When the display is highlighted, the ASSEMBLE editing
mode is set to ON, and the ASSEM button lights.
___
___
___
___
___