Table of Contents
Advertisement
Setup menus
<VIDEO>
(continued)
No./Item
2
For selecting the HD output signal format
636*
during 480i tape (DVCPRO50, DVCPRO, DV or
DVCAM) playback. (See table below.)
480i>HD_
0000
1080i
OUT
0001
720p
0002
---------
2
For selecting the SD output signal format
637*
during 480i tape (DVCPRO50, DVCPRO, DV or
DVCAM) playback. (See table below.)
480i>SD_
0000
480i
OUT
0001
480i
0002
480p
Output connectors
HD SDI OUT
0000
1080i (up-
480i
converted output)
(no conversion)
0001
720p (up-
480i
converted output)
(no conversion)
0002
Muted
480p* (up-
converted output)
<Note>
During SD tape playback, the VTR cannot be operated in the 60
Hz mode.
1
For selecting the up-conversion picture frame
638*
when SD SDI input signals are supplied.
0000
FIT_V:
IN U/C
0001
FIT_H:
MODE
0002
FIT_HV:
1
For selecting the horizontal frequency band
639*
during the up-conversion of SD SDI input
signals.
I U/C RESP H
0000
0001 NARROW
1
For selecting the vertical frequency band
640*
during the up-conversion of SD SDI input
signals.
I U/C RESP V
0000
0001 NARROW
*1: This item is not displayed when the 23/24 Hz or 25 Hz (HD or
SD) mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
*2: This item is not displayed when the 23/24 Hz, 25 Hz (HD or SD)
or 50 Hz mode has been selected as the system menu item
No.25 (SYSTEM FREQ) setting.
*3: This item is not displayed when the 50 Hz or 25 Hz (HD or SD)
mode has been selected as the system menu item No.25
(SYSTEM FREQ) setting.
* Setup menu item No.107 and INPUT CHECK do not function,
and the same signal as this signal line is output.
<Note>
Setup menu items No.638, 639, 640, 641 and 642 do not function
when the AJ-UC1700G optional board has not been installed.
The underlining (__) denotes the factory setting mode.
*UP: With HD output (HD tape playback or up-converted output)
*DW: With SD output (SD tape playback or down-converted output)
Description of setting
SD SDI OUT
VIDEO OUT
480i
(no conversion)
480i
(no conversion)
480i
(no conversion)
Side panel mode
Top and bottom cut in vertical
direction
Stretch mode
STD
STD
No./Item
2
For accentuating the horizontal contours
641*
during up-conversion of SD SDI input signals.
0000
0dB
I U/C ENH
0001
H
i0.7dB
0002
i1dB
0003
i1.2dB
0004
i1.5dB
0005
i2dB
2
For accentuating the vertical contours during
642*
up-conversion of SD SDI input signals.
0000
0dB
I U/C ENH
0001
V
i0.7dB
0002
i1dB
0003
i1.2dB
0004
i1.5dB
0005
i2dB
650
0000* CMPNT*:
STYLE
0001 CMPST:
The asterisk denotes the factory setting for
*
AJ-HD1700E.
3
For selecting the rotational axis of the chroma
651*
phase adjustment.
0000
Pb-Pr:
HUE STYLE
DW
(SD)*
0001
U-V:
653
For adjusting the Y level of the HD SDI output.
(j¶ to 0 dB to i3 dB)
UP
Y LVL (HD)*
0000
0.0%
:
1000
100.0%
:
1413
141.3%
654
For adjusting the PB level of the HD SDI
output.
(j¶ to 0 dB to i3 dB)
Pb LVL
UP
(HD)*
0000
0.0%
:
1000
100.0%
:
1413
141.3%
655
For adjusting the PB level of the HD SDI
output.
UP
Pr LVL (HD)*
(j¶ to 0 dB to i3 dB)
0000
0.0%
:
1000
100.0%
:
1413
141.3%
656
For adjusting the black level of the HD SDI
output.
BK LVL
50
j10.0%
UP
(HD)*
:
150
0.0%
:
250
i10.0%
Description of setting
<Note>
The numbers on the superimposed
display are approximations only.
<Note>
The numbers on the superimposed
display are approximations only.
Level adjustment mode for the
component style
Level adjustment mode for the
composite style
The axis rotates in a perfect
circle on the SDI (component
style) vectorscope.
The axis rotates in a perfect
circle on the analog (composite
style) vectorscope.
:
<Note>
This setting takes effect when
:
"CMPNT" has been selected as the
setup menu item No.650 setting.
<Note>
:
This setting takes effect when
"CMPNT" has been selected as the
:
setup menu item No.650 setting.
<Note>
:
This setting takes effect when
"CMPNT" has been selected as the
:
setup menu item No.650 setting.
<Note>
:
This setting takes effect when
"CMPNT" has been selected as the
:
setup menu item No.650 setting.
95
Advertisement
Table of Contents
