Table of Contents
Advertisement
Error messages
∫ Displaying the hour-meter information
Turn the ADJ dial to move the cursor (
description for the item where the cursor is located is
shown as a superimposed display.
No./Item
H00
Displays in 1-hour increments the time during
which power has been supplied.
OPERATION
H01
Displays in 1-hour increments the amount of
time during which the drum has rotated.
DRUM RUN
H02
Displays in 1-hour increments the amount of time during
which the tape has been running in the FF, REW, PLAY,
TAPE RUN
SEARCH (JOG, VAR and SHTL), REC and EDIT modes (but
not in the JOG, VAR, SHTL or STILL mode).
H03
Displays in 1-time increments the number of
times the tape has been threaded (loaded) and
THREADING
unthreaded (unloaded).
H04
Displays in 1-time increments the number of
front loading operations.
F LOADING
H05
Displays in 1-hour increments the amount of
time during which the LCD monitor has lighted.
LCD ON
H11
Displays in 1-hour increments the amount of
time during which the drum has rotated.
DRUM RUNr
(Can be reset.)
H12
Displays in 1-hour increments the amount of time
during which the tape has been running in the FF,
TAPE RUNr
REW, PLAY, SEARCH (JOG, VAR and SHTL),
REC and EDIT modes (but not in the JOG, VAR,
SHTL or STILL mode). (Can be reset.)
H13
Displays in 1-time increments the number of
times the tape has been threaded (loaded) and
THREADINGr
unthreaded (unloaded). (Can be reset.)
H14
Displays in 1-time increments the number of
front loading operations.
F LOADINGr
(Can be reset.)
H15
Displays in 1-hour increments the amount of
time during which the LCD monitor has lighted.
LCD ON r
(Can be reset.)
H30
Displays the number of times the power has
been turned on.
POWER ON
<Note>
The resettable table hour-meter information items will
be reset by your dealer when maintenance or other
work is performed.
), and the
¢
Description
If "T&S&M" has been selected as the setup menu item
No.006 (DISPLAY SEL) setting, a message appears
in the mode display area whenever a warning or error
has occurred. When a multiple number of errors have
occurred, the one with the highest priority is displayed.
Priority
Display and description
Higher
Error messages (see error message table): When any
problem arises with the VTR's operation, the AUTO OFF
lamp lights, and an error message is displayed.
INT SG: If, when "INT SG" has been selected as the audio
input setting by
F1
<AUDIO> or <AUDIO SHIFT1> menu, and the EDIT button is
pressed, this message is displayed for the first two seconds
when editing is started. In the same way, it is displayed for the
first two seconds when recording is started.
NO INPUT: If, when input signals (but not analog audio
signals) are not supplied to the input connector selected by
(VID IN) on the <VIDEO> menu or by the <AUDIO> or
F1
<AUDIO SHIFT1> menu, the EDIT button is pressed, this
message is displayed for the first two seconds when editing
is started. In the same way, it is displayed for the first two
seconds when recording is started.
Warning messages (see warning message table): When
a warning occurs in this VTR, the warning lamp lights, and a
warning message is displayed. When a multiple number of
warnings have occurred, the one with the highest priority is
Lower
displayed.
(VID IN) on the <VIDEO> menu or by the
119
F1
Advertisement
Table of Contents
