Sharp MX-M905 Troubleshooting Manual page 45

Hide thumbs Also See for MX-M905:

Fax Problems

BROADCAST TRANSMISSION DOES NOT WORK

Check

Has broadcast setting been disabled

in the setting mode (administrator)?

I DON'T KNOW HOW TO CHECK AN ADDRESS

WHEN SENDING A FAX

Check

Tap the [Address Review] key.

Is "Fax Dest. Confirmation Mode"

enabled in setting mode?

Solution

■ Broadcast transmission cannot be performed when "Settings (administrator)" -

[System Settings] → [Image Send Settings] → [Fax Settings] → [Send Setting]

→ [Disable Fax Broadcasting] is disabled.

Solution

■ Tap the [Address Review] key to view a list of the addresses.

■ Enable "Settings (administrator)" - [System Settings] → [Image Send Settings] →

[Fax Settings] → [Default Settings] → [Fax Dest. Confirmation Mode]. When this

setting is enabled, an address confirmation message will appear when you send

a fax to prevent erroneous transmission.

Table of Contents