Advertisement
General Problems
STAPLING DOES NOT TAKE PLACE (INCLUDING
?
SADDLE STITCH)
Check
Does a message appear instructing
you to check the staple unit?
Does a message appear instructing
you to add staples?
Is a different width of paper mixed in?
Are there more sheets than can be
stapled at once?
Is a paper size that cannot be stapled
included in the print job?
Is the paper type setting of the tray
selected in the printer driver set to a
paper type that cannot be stapled?
PUNCHING DOES NOT TAKE PLACE
?
Check
Does a message appear instructing
you to check the punch module?
Is a different size of paper mixed in?
Is a paper size that cannot be
punched included in the print job?
Is the tray selected in the printer
driver set to a paper type that cannot
be punched?
!
Solution
■ Remove jammed staples.
■ Replace the staple cartridge.
Do not forget to replace the staple case.
■ To perform mixed size stapling, using paper of the same width and select the
[Same Width] setting.
Stapling is not possible when paper of different widths are mixed together. When
copying, select [Same Width] for [Mixed Size Original] in [Others].
■ For the maximum number of sheets that can be stapled, see "SPECIFICATIONS"
in Start Guide.
■ For paper sizes that can be stapled, see "SPECIFICATIONS" in Start Guide.
■ You must check the paper types that are set on the machine, and select a paper
tray that is set to paper* that can be used for staple printing.
Click the [Tray Status] button in [Paper Source] tab of the printer properties
window and check the paper type setting of each tray.
* Stapling is not possible on labels, tab paper, glossy paper or transparency film.
In addition, if "Disable Staple" is selected in the user type, stapling will not be
possible.
!
Solution
■ Dispose of punch scraps.
■ Punching is not possible when different widths of paper are mixed together. To perform
mixed size punching, use paper of the same width and select the [Same Width] setting.
When copying, select [Same Width] for [Mixed Size Original] in [Others].
■ For the paper sizes that can be punched, see "SPECIFICATIONS" in Start Guide.
■ Check the paper type settings in the machine and select a tray that has paper
that can be used for punching*. Click the [Tray Status] button in [Paper Source]
tab of the printer properties window and check the paper type setting of each tray.
* Punching is not possible on labels, tab paper, glossy paper and transparency
film. In addition, if "Disable Punch" is selected in the user type, punching will
not be possible.
20
Advertisement
