Periodic Replacement Of Defined Life Parts; Defined Life Parts List - Komatsu H75051 Operation & Maintenance Manual

Wheel loader
Table of Contents

Advertisement

PERIODIC REPLACEMENT OF DEFINED LIFE PARTS

PERIODIC REPLACEMENT OF DEFINED LIFE PARTS
For using the machine safely for an extended period of time, you must periodically replace the safety critical and
fire prevention-related parts listed in the table of the defined life parts.
Material quality of these parts can change as time passes and they are likely to wear out or deteriorate. Howev-
er, it is difficult to determine the extent of wear or deterioration at the time of periodic maintenance. Hence, it is
required to replace them with new ones regardless of their condition after a certain period of usage. This is im-
portant to ensure that these parts maintain their full performance at all times.
Furthermore, should anything abnormal be found on any of these parts, replace it with a new one even if the
periodic replacement time for the part has not yet arrived.
If any of the hose clamps show deterioration like deformation or cracking, replace the clamps at the same time
as the hoses.
Also perform the following checks with hydraulic hoses which need not to be replaced periodically. Tighten all
loose hoses and replace defective hoses, as required.
When replacing hoses, always replace O-rings, gaskets, and other such parts at the same time.
Have your Komatsu distributor replace the defined life parts.

DEFINED LIFE PARTS LIST

No.
1
Fuel system
2
Steering system
3
Brake system
4
Torque converter, trans-
mission system
5
Work equipment hydraulic
system
6
Others
7-2
Periodical replacement parts
Fuel hose
Spill hose
High pressure circuit hose
Brake oil pressure hose
HST circuit hose
Main pump delivery hose
Main pump delivery hose other than described
above
Main pump LS hose
Hydraulic drive fan hose (Exhaust fan)
External work equipment hose
Lift cylinder hose
Bucket cylinder (bottom) hose
Bucket cylinder (head) hose
Main valve hose
Quick coupler hose
PPC accumulator
Seat belt
REPLACEMENT PARTS
Replacement interval
Every 2 years or 4000 hours,
whichever comes sooner
Every 3 years from start of us-
age or 5 years after manufac-
turing of seat belt, whichever
comes sooner

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wa270-8H83001

Table of Contents