Table of Contents
Advertisement
OPERATION
3.
"Do you send Numeric Input?" When this message is dis-
played, press ENTER switch (2) again.
The input value will be sent out.
To cancel, press RETURN switch (1).
The input number is cleared.
REMARK
If the message is replied, "Numeric Input (Done)" is displayed
for it.
OTHER FUNCTIONS OF MACHINE MONITOR
Confirm the service meter or odometer when the starting switch key is set to
OFF position
The service meter and odometer can be displayed even if the machine monitor is not turned ON.
1.
Press UP switch (2) while holding down DOWN switch (1)
when the starting switch is in OFF position.
Service meter (A) and odometer (B) are displayed while
both switches are held down.
NOTICE
If the monitor screen is displayed during other operations
while the starting switch is at OFF position, there is proba-
bly a failure in the equipment, so ask your Komatsu dis-
tributor for inspection.
EXPLANATION OF COMPONENTS
3-91
Advertisement
Chapters
Table of Contents
