Komatsu H75051 Operation & Maintenance Manual page 288

TRANSPORTATION
3.
Press the work equipment lock switch (1) and lock the
work equipment (the pilot lamp in the switch is lit).
4.
Move the parking brake switch (3) from OFF position (B) to
ON position (A), with the brake pedal (2) depressed, to ap-
ply the parking brake securely.
Check that the machine is stopped completely.
5.
Turn the starting switch to OFF position and stop the en-
gine.
Remove the key from the starting switch.
6.
Set the frame lock bar to LOCK position (L) to lock the
front and rear frames.
7.
Set chocks at the front and rear of the tires to prevent the
machine from moving during transportation.
8.
Tie one end of each chain or wire rope of appropriate strength to the tie-down holes as shown in the figure,
and secure the machine.
Secure the machine so that it will not move during transportation.
In particular, fix the machine securely to prevent it from slipping sideways.
Keep the securing tools off the machine.
9.
Stow the antenna, etc.
3-222
OPERATION