Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
AUX
NOTICE
•
A stereo miniature plug can be connected.
•
As a power source, use the battery attached to the equipment to connect.
If you use an electric power supply installed to the machine, the noise may occur.
•
The noise may occur if you pull out the input plug when AUX is selected, or if you push in or pull
out the plugs of the equipment to connect.
You can hear the sound through the speaker of the machine when you connect a commercially available porta-
ble audio equipment to the machine.
1.
Open cap (A).
2.
Connect a portable audio equipment by using an commer-
cially available audio cable.
3.
Press the band/AUX selector button and select AUX.
FUSE
NOTICE
When replacing the fuse, be sure to turn the starting switch to OFF position and, after confirming that
the system operating lamp is not lit, set the battery disconnect switch key to OFF position.
The fuses protect the electrical component and wiring from burning out.
If the fuse is corroded, or loose in the fuse holder, or looks white powdery, replace it.
Replace the fuse with the one of the same capacity.
Should the fuse is blown, investigate the cause and take necessary actions.
Inside rear console box
Loosen the knobs (1) (2 places), then remove the cover (2).
Fuse boxes are A, B, and C inside.
3-116
OPERATION
Advertisement
Chapters
Table of Contents
