Table of Contents
Advertisement
EXPLANATION OF COMPONENTS
1.
Select "Traction Level Selection" on "Machine Setting and
Information" menu, then press ENTER switch (1).
2.
Select the traction level in accordance with the operating
condition, then press ENTER switch (1).
"Auto"
•
Controller judges the operating condition, and set the
maximum rim pull automatically.
•
Optimum control of the HST pump and HST motor ac-
cording to the work load is performed and it can re-
strain the fuel consumption.
•
When the Eco Traveling mode is set to "ON", the fuel
consumption during traveling at 3rd or 4th can be re-
duced.
"Level 1" to "Level 5"
Most suitable setting can be selected in accordance with the specific gravity of handled material, operating
condition, and application.
Initially, "Auto" is selected.
TRACTION LEVEL SELECTION HOLD
You can decide whether the selected traction mode at the engine stop should be held or not according to the
following procedure.
3-64
OPERATION
Advertisement
Chapters
Table of Contents
