OPERATION
REMARK
•
The explanation of the manual stationary regeneration
is displayed in 3 parts on the monitor panel. When
ENTER switch is pressed, the regeneration can be
started immediately, regardless of which part is dis-
played. When RETURN switch is pressed, the display
returns to the standard screen.
•
If no monitor switch is operated for 30 seconds, the
explanation display of the manual stationary regenera-
tion is not displayed and the screen returns to the
standard screen. At this time, to display the explana-
tion of the manual stationary regeneration again,
press ENTER switch on the standard screen to dis-
play "Aftertreatment Devices Regeneration" screen.
7.
This screen is displayed during the manual stationary re-
generation. It may take more than 30 minutes to complete
the manual stationary regeneration. Do not touch any
switch on the screen or accelerator pedal until the regener-
ation is completed and the standard screen is displayed
again.
EXPLANATION OF COMPONENTS
3-129