MAINTENANCE
CHECKS BEFORE STARTING
For details of the following items, see the pages where they are explained.
Checks before starting engine.
"METHOD FOR WALK-AROUND CHECK"
•
Check the work equipment, cylinders, linkage, and hoses for damage, wear, play.
•
Remove dirt and debris from the center hinge portion.
•
Remove dirt and debris from around the engine, battery, and radiator.
•
Check the engine and related parts for leakage of water, oil and exhaust gas.
•
Check the fuel line for leakage.
•
Check the DEF line for leakage.
•
Remove dirt from around the aftertreatment devices.
•
Check around the aftertreatment devices for gas leakage.
•
Check the KCCV piping for gas leakage and oil leakage.
•
Check around the SCR for exhaust gas leakage.
•
Check the HST piping, transfer case, axle, hydraulic tank, hoses, and joints for oil leakage.
•
Check the brake line for oil leakage.
•
Check the tires, wheels, and wheel hub bolts and nuts for damage and wear, and check the mounting bolts
and nuts for looseness.
•
Check the handrails and steps for breakage and loose bolts.
•
Check the gauges and monitor for problem.
•
Check the rear view mirror.
•
Check the air cleaner mounting bolts for looseness.
•
Check the battery terminals for looseness.
•
Check the seat belt and mounting hardware.
•
Clean the cab windows.
•
Check the tires.
•
Check the rims.
•
Check the rear view monitor.
"METHOD FOR CHECKING BEFORE STARTING"
•
Method for checking water separator, drain water and sediment.
•
Method for checking coolant level, adding coolant.
•
Method for checking oil level in engine oil pan, adding oil.
•
Method for checking dust indicator.
•
Method for checking electric wiring.
•
Method for checking fuel level, adding fuel.
•
Method for checking DEF level and adding DEF.
•
Method for checking tire pressure.
•
Method for checking window washer fluid spouting out.
•
Method for checking wiper function.
•
Method for checking machine monitor.
•
Method for checking horn.
•
Method for checking defroster function.
•
Method for checking locks.
•
Method for checking alternate exit of cab.
MAINTENANCE PROCEDURE
4-43