Method For Lubricating Drive Shaft - Komatsu H75051 Operation & Maintenance Manual

MAINTENANCE PROCEDURE
DEFINED LIFE PARTS LIST
No.
1 Fuel system
2 Steering system
3 Brake system
4 Torque converter, trans-
mission system
5 Work equipment hydraulic
system
6 Others

METHOD FOR LUBRICATING DRIVE SHAFT

Use the special grease for drive shaft, and perform greasing every 4000 hours or every 2 years.
If the special grease is not used but common lithium base grease is used, perform greasing every 1000 hours
after then.
Part No. of special grease for drive shaft: 56B-20-19910
1.
By using a grease pump, pump in grease through the grease fittings shown by arrows.
2.
After greasing, wipe off any old grease that is pushed out.
(1) Front drive shaft (2 places)
4-82
Periodical replacement parts
Fuel hose
Spill hose
High pressure circuit hose
Brake oil pressure hose
HST circuit hose
Main pump delivery hose
Main pump delivery hose other than described
above
Main pump LS hose
Hydraulic drive fan hose (Exhaust fan)
External work equipment hose
Lift cylinder hose
•
Bucket cylinder (bottom) hose
•
Bucket cylinder (head) hose
•
Main valve hose
•
Quick coupler hose
•
PPC accumulator
MAINTENANCE
Ask your Komatsu distributor
for replacement.