Table of Contents
Advertisement
MACHINE OPERATIONS AND CONTROLS
4.
After the parking brake pilot lamp lights up, release the
brake pedal gradually.
METHOD FOR STEERING MACHINE
•
Avoid steering during high-speed travel or steering on a steep slope, since it is dangerous.
•
Do not stop the engine during travel, since the steering operation becomes heavy if the engine is
stopped.
It is particularly dangerous if the engine is stopped while the machine is traveling on slopes, so
never try such practice.
If the engine stops while traveling, place the machine immediately in a safe place.
•
When the machine is traveling, turn the steering wheel (1)
to the desired direction, then the machine turns to the di-
rection.
Front and rear frames of this machine is articulated around
the connection pin (center pin) at which the 2 frames are
connected with each other and the rear wheels follow the
trace of the front wheels.
•
Turn the steering wheel lightly as it follows the turning of machine.
NOTICE
When steering the machine fully, if the steering wheel
is turned to its stroke end, do not try to turn it further.
Check that the play (a) of steering wheel is 60 mm or
less, and that the operation of steering wheel is nor-
mal. If any problem is found, ask your Komatsu dis-
tributor for inspection.
3-190
k
k
WARNING
OPERATION
Advertisement
Chapters
Table of Contents
