MACHINE OPERATIONS AND CONTROLS
METHOD FOR REMOVING AND INSTALLING HEADREST
METHOD FOR REMOVING HEADREST
When the headrest is not necessary, remove it according to the following procedure.
1.
Pull up the headrest until it stops.
2.
Pull up the headrest strongly, and it will come out.
METHOD FOR INSTALLING HEADREST
1.
Insert the headrest into the hole at the seat back.
2.
Push down the headrest.
METHOD FOR ADJUSTING MIRRORS
Be sure to adjust the mirrors before starting work. If they are not adjusted properly, you cannot secure
the visibility and may be injured or may lead to a serious personal injury or death.
NOTICE
•
Tighten the mirror mounting bolts securely to prevent the mirrors from coming off due to loosening
of the bolt.
Tightening torque of mirrors (A) and (B): 2.0 to 2.5 Nm {0.2 to 0.25 kgm}
•
If the torque cannot be controlled, ask your Komatsu distributor for adjustment.
3-166
k
k
WARNING
OPERATION