Furuno VR-7000S Installation Manual page 46

2. WIRING
2.1.4 Changing internal LAN connection (for video signal input with
IEC61162-450 format)
The J502 port (DATA) is connected to the J17 port internally in default. When you in-
put the radar/ECDIS video signal with the IEC61162-450 (LAN) format, disconnect the
LAN cable from the J17 port and connect it to the J26 port.
Note: To record chart information, video signal input from the ECDIS is required.
According to the access point (J17 or J26), the IP address for the VDR and PC chang-
es.
Access point for J502
J17 (Default)
J26
2-6
Disconnect the LAN
cable from the J17
port.
Connect to the
J26 port
IP address for VDR
172.31.16.200
10.0.0.100
IP address for PC
172.31.16.201 or 172.31.16.202
10.0.0.101 or 10.0.0.102