Furuno VR-7000S Installation Manual page 18

1. MOUNTING
14. Repeat step 11 to step 13 to check that there is no interference with other equip-
ment.
Mounting
1. Release the safety clip and remove the cover
and capsule from the mounting bracket.
2. Fix the mounting bracket with the supplied instal-
lation materials.
Fixing holes
(six places)
3. Apply the supplied silicone grease between the docking module and storage mod-
ule, then reattach the capsule.
The silicone grease is supplied with the float-free DRU. The grease is marked as
"Item no.88237 Tron-40VDR".
Note: Do not use the silicone grease other than the supplied silicone grease. The
silicone grease is used for the maintenance of the float-free DRU, so make a
space for storage around the DCU and store the grease on the vessel.
Storage module Storage module
Docking module
1-10
Detailed view
Flat washer
Spring washer
Hex. nut
Approx. 5 cm Approx. 5 cm
Squeeze the grease by approx. 5 cm from the tube.
Apply the grease evenly to the areas surrounded by the line.
Safety clip
Cover
Socket head
bolt
Bracket
Approx. 5 cm Approx. 5 cm