Furuno VR-7000S Installation Manual page 19

4. Confirm the following points;
• There is no space or foreign material between the storage module and docking
module.
• The notch on the docking module is placed in the groove of the storage module.
OK
WRONG
• The antenna of the capsule is placed in the antenna holder correctly.
5. Reattach the cover to the bracket correctly, referring to "How to attach the
cover" on page 1-13.
Note: If the cover is not attached correctly, the cover and capsule may drop out
of the bracket due to wind and/or vibration.
Recording the expiration date of the battery and hydrostatic release unit
After installing the float-free DRU, confirm the expiration date of the battery (inside the
float-free DRU (capsule)) and hydrostatic release unit, then record them to the table
in section 3.2. The expiration date is recorded during coding (see page AP-31).
• Battery in the float-free DRU
The expiration date of the battery is indicated on the sticker attached to the side of
the capsule. According to the expiration date, the numbers on the sticker are cut out
The notch on the docking module is placed
in the groove of the storage module.
No space or foreign material between the
storage module and docking module.
The notch on the docking module is not
placed in the groove of the storage
module.
There is space between the storage
module and docking module.
Antenna holder
Capsule:
The battery is built-in.
Hydrostatic release unit
Bracket
1. MOUNTING
1-11