Furuno VR-7000S Installation Manual page 28

1. MOUNTING
How to replace the VR-5011 with the VR-7011
The mounting holes of the Microphone VR-5011 (for previous models) can be reused
when replacing the VR-5011 with the VR-7011, using the optional microphone re-
placement kit OP24-44.
1. Remove four screws to remove the fixing plate from the VR-7011.
2. See the outline drawing below to resize the mounting hole for the VR-5011.
3. Fasten the front fixing panel (option) to the mounting hole with four self-tapping
screws ( 4 16).
The screws to fasten the front fixing panel are supplied with the VR-7011.
4. Fasten the VR-7011 to the front fixing panel with the screws removed at step 1.
1-20
VR-7011
Pilot holes four places
Bulkhead Bulkhead
Fixing plate
Location of screw
102±1
105±0.5
Front fixing panel