Operation Panel - Gestetner CS213d Copy Reference Manual

Cat2-5_FM.book Page 7 Thursday, December 14, 2000 4:36 PM

Operation Panel

1.
Screen Contrast knob
You can change the brightness of the dis-
play.
{ { { { Special Accessory} } } } key
2.
This key is not used for this machine.
{ { { { User Tools} } } } key
3.
Press to change the default setting. ⇒
P.211 "User Tools".
{ { { { Adjustment/Memory} } } } key
4.
Press to adjust the image or color balance,
or to make user colors. ⇒ P.131 "Adjust-
ment and Color Memory".
{ { { { Program} } } } key
5.
Press to select the program mode. ⇒ P.55
"Program".
6.
Editor pen (option)
Use to designate areas.
The editor pen is included in the optional
editing kit.
{ { { { Recall} } } } key
7.
Press to recall the previously selected
copy jobs.
Printed Matters
{ { { { Energy Saver} } } } key
8.
Press to enter/exit the Energy Saver
mode. ⇒ P.52 "Energy Saver Mode".
{ { { { Clear Modes} } } } key
9.
Press to clear the previously entered set-
tings.
{ { { { Interrupt} } } } key
10.
Press to make interrupt copies. ⇒ P.53
"Interrupt Copying".
{ { { { Counter} } } } key
11.
Press to display the total number of cop-
ies made.
12.
Main Power indicator
This indicator goes on when the main
power switch is turned on, and goes off
when the switch is turned off.
13.
On indicator
This indicator goes on when the opera-
tion switch is turned on, and goes off
when the switch is turned off.
14.
Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off).
7