Directional Size Magnification (Mm) - Gestetner CS213d Copy Reference Manual

Cat2-5_FM.book Page 64 Thursday, December 14, 2000 4:36 PM
Copying
E
Enter the vertical ratio with the number keys, and then press the [#] key.
2
F
Place your originals, and then press the { { { { Start} } } } keys.

Directional Size Magnification (mm)

1
2
1.
Horizontal original size
2.
Vertical original size
The suitable reproduction ratios will be automatically selected when you enter
the horizontal and vertical lengths of the original and copy image you require.
Note
❒ You can enter sizes within the following ranges:
Metric Version
Inch Version
❒ If the calculated ratio is over the maximum or under the minimum ratio, it is
corrected within the range of the ratio automatically. However, with some ra-
tios, parts of the image might not be copied or blank margins might appear
on copies.
64
Printed Matters
3
4
GCDHEN2E
3.
Horizontal copy size
4.
Vertical copy size
1 - 999mm (in 1mm steps)
0.1" - 99.9" (in 0.1" steps)