Cat2-5_FM.book Page 24 Thursday, December 14, 2000 4:36 PM
Basics
Placing Custom Sized Originals
When copying from custom sized originals, enter the original size so that the
copy is well aligned.
1
Limitation
❒ You must place your custom size originals on the exposure glass.
Reference
For details about the standard sizes the machine can detect, ⇒ P.16 "Standard
Size Originals".
Note
❒ The dimensions you can enter must be within the following ranges:
Vertical size
Horizontal size
A
Select the copy paper size.
B
Press the [Custom Size Orig.] key.
C
Make sure that the [Orig. Horiz.] key is selected. Enter the horizontal size
with the number keys, and then press the [#] key.
Note
❒ To change the value entered, press the [Clear] key, and then enter a new
value.
24
Printed Matters
50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)
50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)