Starting The Machine - Gestetner CS213d Copy Reference Manual

Cat2-5_FM.book Page 14 Thursday, December 14, 2000 4:36 PM
Basics

Starting the Machine

A
Press the operation switch to make the On indicator go on.
1
Note
❒ If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
❒ During the warm-up period (about 8.5 minutes), you can use the Auto
Start function. ⇒ P.54 "Auto Start".
When the machine is set for user codes
A
Enter your user code with the number keys. Then press the { { { { #} } } } key.
Note
❒ To prevent others from making copies with your user code, press the {Clear
Modes} key and the {Clear /Stop} key simultaneously after copying.
Reference
For details about how to set user codes, ⇒ P.217 "General Features".
When the Energy Saver indicator is lit
The machine is in Energy Saver mode.
A
Press any key.
The machine will return to the ready condition.
Note
❒ The machine will also return to the ready condition when an original is set
in the document feeder, or when the platen cover or the document feeder
is opened.
14
Printed Matters