Basic Modes - Gestetner CS210 Color Manual

Selecting Modes for Designated Areas
Reference
The available modes for area editing depend on the area shape.
For functions that cannot be used together in area editing,
More than one mode can be set for designated area, however, there are some limitations,
patterns of modes can be set together.
Note
Up to 20 groups of multiple areas can be edited. All the areas should belong to groups 1 ~ 20.
You can select up to seven job patterns for at most 20 groups. After you have set seven patterns, the copier will only
allow you to choose the pattern of a previous group.
If you change the settings for one group, it will change the settings for all other groups with the same job pattern.
However, if you have set a Paint, Color Background, or Frame/ Line, changing the color in one group will not affect
other groups. (Up to 15 colors can be selected.)
The modes that can be set for inside areas as follows:
Color/Image Adjustment: Image Density, Color Mode, Original Type, Image Adjustment, Color Adjustment, Color
Color Creation:
Image Creation:
Note
The editing functions available when specifying area with Frame/Line mode are Width and Color.
Color/Image Adjustment's default setting:
• Image Density - Manual Image Density
• Color Mode - Black
• Original Type - Text
You can change the default settings.
Depending on the shapes of the areas, coloring or deleting near the outlines of the areas might not do well, or the
outlines might become uneven.
The way to set modes is basically the same as for the entire image. For details, refer to each page.
To fill an area with a selected color, select the Paint.
Image Density See page 39.
Original Type See page 44.
Color Adjustment See page 131.
Color Conversion See page 85.
Type Mask See page 89.
Color Background See page 88.
Outline Image See page 91.
Slanted Image See page 95.
Positive/Negative See page 101.
Color Mode See page 40.
Area Shapes

Basic modes

1
Designate the areas you wish to modify.
Note
For designating areas,
152
Selecting Modes for Designated Areas
Balance Adjustment
Color Conversion, Color Erase, Color Background, Paint, Type Mask
Outline Image, Shadow Image, Slanted Image, Mirror Image, Positive/Negative
See page 187.
see page 145.
See page 164.
see page 164.
Image Adjustment See page 132.
Color Balance Adjustment
Color Erase See page 87.
Shadow Image See page 92.
Mirror Image See page 96.
Save Area See page 154.
Changing Job Settings for the Entire Image
See page 158.
Change Modes See page 159.
Adding Areas See page 160.
Erasing a Group See page 162.
see page 164. And up to 7
See page 124.