Table of Contents
Advertisement
Choosing Next Job
After copying, you can select the next job:
[Select Film]
You can change the type of film.
[Shading]
If the mirror unit is moved, or if some lines appear on the copy, you can perform shading again.
[Col. Balance/Dens.]
You can adjust the color tone, image density, or adjust the focus manually.
[Continue]
You can copy the same film again, or you can copy another film which is of the same type.
1
Press the Special Accessory key.
2
Select your next job.
232
Choosing Next Job
Advertisement
Table of Contents
