Table of Contents
Advertisement
Selecting the Film Type and Performing Shading
35mm Strip Negative
1
Press the [Shading] key.
2
Insert the "N" (Negative) filter in the left slot as
shown in the illustration.
Note
Be careful to insert the filter as shown, not the other
way around.
Before going to the next step, make sure that the
fresnel lens is lowered in position.
3
Set the base film in the holder.
Reference
Regarding setting the base film,
4
Open the film cover and while pressing the holder
lever to the left, insert film strip holder the right
slot.
5
Insert the holder until the
shown in the illustration.
6
Press the [Shading] key.
Note
The machine will start shading automatically.
224
1: Filter
see page 217.
mark is placed as
1: Holder lever
1
TRSR0F0E
1
TRSR0J0E
Advertisement
Table of Contents
