Table of Contents
Advertisement
Note
Do not touch the fresnel lens or the glass on the mirror unit. Fingerprints or dirty parts might appear on the copy. If the
fresnel lens becomes dirty, wipe it.
1
Plug the projector into the wall outlet.
2
Turn on the main switch of the projector.
3
Lift the platen cover or the document feeder and
lower the projector lens cover.
4
Place the mirror unit so that the unit's position
holes fit over the projector's positioning pins.
Note
Please be careful not to scratch the exposure glass
when setting the mirror unit on it.
5
Slide the mirror unit release lever in the direc-
tion of the arrow and open the mirror unit cover.
See page 236.
1. Lens cover
1. Mirror unit
2. Positioning pins
1. Mirror unit release lever
Positioning the Projector
Positioning the Projector
1
TRSR0C0E
1
2
TRSR0D0E
1
TRSR0E0E
215
Advertisement
Table of Contents
