Table of Contents
Advertisement
5
Press the [Shading] key.
Note
The machine will start shading automatically.
6
Lift the fresnel lens, place the film inside the film
position sheet, and lower the fresnel lens.
Note
Place the film face down.
If the film is curled, the copy image might be out of
focus. In this case, make the cutout film position sheet
a little smaller than the film size and use it to hold the
film down.
7
If needed, adjust the color, density, or focus.
Reference
For details,
see page 228.
8
If needed, select the copier modes.
Reference
For details,
see page 231.
9
Press the Start key.
0
Choose your next job.
Reference
For details,
see page 232.
Selecting the Film Type and Performing Shading
1
2
1. Fresnel lens
2. Film
TRSR0P0E
223
Advertisement
Table of Contents
