Copying; Basic Procedure - Gestetner CS555 Copy Reference Manual

Basic Procedure

Preparation
When User Code Authentication is
set, the screen for entering a user
code will be displayed. Enter your
user code using the number keys,
and then press the { { { { #} } } } key.
When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, the authenti-
cation screen will be displayed.
Enter your login user name and
user password, and then press [Lo-
gin]. See "When the Authentication
Screen is Displayed", General Set-
tings Guide.
Reference
For user codes, see "Authentica-
tion Information", General Settings
Guide.
Note
❒ To copy onto thick paper of 127
2
g/m (34 lb.) or heavier, specify the
paper thickness under "Paper
Thickness Settings" in User Tools.
See "Paper Thickness Setting", Gen-
eral Settings Guide.
A A A A
Make sure "d d Ready" is shown d d
on the display.
If any other function is displayed,
press the { { { { Copy} } } } key.
❖ ❖ ❖ ❖ Initial copy display

2. Copying

B B B B
Make sure no previous settings
remain.
Note
❒ When there are previous set-
tings remaining, press the { { { { Clear
Modes} } } } key before entering your
settings.
C C C C
Place the originals.
Reference
p.13 "Placing Originals"
D D D D
Make the necessary settings.
Reference
Refer to each function.
E E E E
Enter the required number of cop-
ies using the number keys.
Note
❒ The maximum copy quantity
that can be set is between 1 and
999.
F F F F
Press the { { { { Start} } } } key.
Copying starts.
Note
❒ When placing originals on the
exposure glass, press the { { { { #} } } }
key after all the originals are
scanned.
❒ Copies are delivered face down.
19