Installing The Optional Memory Card - Gestetner F530 Install Manual

5.
There are two pins on the top of the Paper
Tray Unit that point straight up. On the
bottom of the machine there are two holes.
Align the holes over the pins and lower the
machine gently onto the Paper Tray Unit.
Note
• Two people are better for lifting the machine.
• Be careful not to pinch your fingers.
Important
When lifting the machine, use the inset grips
on both sides. The machine could be
damaged or cause injury if dropped.
6.
Stick the appropriate tray-number decal
and paper-size decal on the locations
indicated in the illustration.
7.
If you changed the paper size of the paper
tray, set the paper size with the User Tools.
Reference
TFor information about setting paper size, see
"Changing the Paper Size Setting" in the Advanced
Features manual.
After Setting the Paper Tray Unit
Reference
TFor information about loading paper, see "Loading
Paper in the Optional Paper Tray Unit" in the Advanced
Features manual.
Installing the
Optional
Memory Card
If you install the optional memor y card later, read the
following Important, and then perform
Important
• Turn the power switch off before installing
cards or they could be damaged.
• Fax files programmed in memory will not be
deleted while the optional memory card is
installed.
• When you install the optional memory card to
the machine, make sure that 100% is shown
on the display and turn off the power switch.
Turn off the power switch.
Continued on next page
4
.
6