[Remote1 Mode]; [Function Button]; [Lens Calibration] - Panasonic PT-MZ570 Operating Instructions Manual

[VW431D]
6) Press the <ENTER> button.
f The confirmation screen is displayed.
7) Press qw to select [OK], and press the <ENTER> button.

[REMOTE1 MODE]

Set the <REMOTE 1 IN> terminal.
1) Press as to select [REMOTE1 MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[USER]
[F/W SERIES]
f Proceed to Step 3) when [USER] is selected.
3) Press the <ENTER> button.
4) Press as to select one from [PIN2] to [PIN8], and press qw to switch the setting.

[FUNCTION BUTTON]

Set the function of the <FUNCTION> button on the remote control.
1) Press as to select [FUNCTION BUTTON].
2) Press the <ENTER> button.
f The [FUNCTION BUTTON] screen is displayed.
3) Press as to select a function.
[DISABLE]
[SUB MEMORY]
[SYSTEM SELECTOR]
[DAYLIGHT VIEW]
4) Press the <ENTER> button.

[LENS CALIBRATION]

Detect the lens shift limit value of the projector, and automatically set the home position.
1) Press as to select [LENS CALIBRATION].
2) Press the <ENTER> button.
f The confirmation screen is displayed.
3) Press qw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
f The lens moves up, down, left, and right to detect the lens shift limit value, and automatically set the home
position.
f The lens stops to complete the lens calibration.
Note
f [PROGRESS] is displayed in the menu during lens calibration. The operation cannot be canceled during calibration.
f [INCOMPLETE] is displayed when the lens calibration was not executed correctly.
f Pressing the <FOCUS> button on the remote control for three seconds or longer will also display the confirmation screen for lens calibration
execution.
122 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
VW431D series
Uses pin assignment of the <REMOTE 1 IN> terminal in standard setting.
Use this item when changing the setting of the <REMOTE 1 IN> terminal. (x page 217)
Uses the <REMOTE 1 IN> terminal setting compatible with the F/W series.
Disables the <FUNCTION> button.
Displays the sub memory list. (x page 135)
Switches the [SYSTEM SELECTOR] setting. (x page 89)
Switches the [DAYLIGHT VIEW] setting. (x page 88)