Current Mode; Clamp; Display Area H; Display Area V - Panasonic PT-VX41 Operating Instructions Manual

Manual PC adjust

Current mode

1 ) Press ▲▼ to select [Current mode].
2 ) Press ► or the <SELECT> button
to enter the next submenu to show
H-sync freq. and V-sync freq. of the
connected computer.

Clamp

1 ) Press ▲▼ to select [Clamp].
2 ) Press the <SELECT> button to display
the adjustment dialog box.
3 ) Press ◄► to adjust the clamp level.
When the image has dark bars, try this
z
adjustment.

Display area H

1 ) Press ▲▼ to select [Display area H].
2 ) Press the <SELECT> button to display
the adjustment dialog box.
3 ) Press ◄► to adjust the horizontal area
displayed by this projector.

Display area V

1 ) Press ▲▼ to select [Display area V].
2 ) Press the <SELECT> button to display
the dialog box.
3 ) Press ◄► to adjust the vertical area
displayed by this projector.
40
- ENGLISH

Reset

To reset the adjusted data, all adjustments will return
to their previous figures.
1 ) Press ▲▼ to select [Reset].
2 ) Press the <SELECT> button.
A confirmation box appears and then select [Yes].
z

Mode free

1 ) Press ▲▼ to select [Mode free].
2 ) Press ► or the <SELECT> button to
enter the next submenu.
Move the highlight to the mode that you want to
z
clear and then press the <SELECT> button.
A confirmation box appears and then select [Yes].
z

Store

1 ) Press ▲▼ to select [Store].
2 ) Press ► or the <SELECT> button to
enter the next submenu.
Move the highlight to one of the Modes 1 to 10
z
in which you want to store, and then press the
<SELECT> button.
A confirmation box appears and then select [Yes].
z