[Picture] Menu; [Picture Mode]; [Contrast]; [Brightness] - Panasonic PT-MZ570 Operating Instructions Manual

[PICTURE] menu

On the menu screen, select [PICTURE] from the main menu, and select an item from the sub‑menu.
Refer to "Navigating through the menu" (x page 80) for the operation of the menu screen.

[PICTURE MODE]

You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1) Press as to select [PICTURE MODE].
2) Press qw or the <ENTER> button.
f The [PICTURE MODE] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[STANDARD]
[DYNAMIC]
[DICOM SIM.]
[BLACKBOARD]
[WHITE BOARD]
[CINEMA]
*1
[NATURAL]
*2
*1 When movie signal is input
*2 When still image signal is input
Note
f DICOM is an abbreviation of "Digital Imaging and COmmunication in Medicine" and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and display images should not be used for medical purposes such as diagnosis.

[CONTRAST]

You can adjust the contrast of the colors.
1) Press as to select [CONTRAST].
2) Press qw or the <ENTER> button.
f The [CONTRAST] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation
Press w.
Press q.
Attention
f When it is necessary to adjust [CONTRAST] and [BRIGHTNESS], adjust the [PICTURE] menu → [BRIGHTNESS] first.

[BRIGHTNESS]

You can adjust the dark (black) part of the projected image.
1) Press as to select [BRIGHTNESS].
2) Press qw or the <ENTER> button.
f The [BRIGHTNESS] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation
Press w.
Press q.
Chapter 4 Settings — [PICTURE] menu
The image becomes suitable for moving images in general.
The image becomes suitable for use in bright areas.
The image becomes similar to that of DICOM Part 14 Grayscale Standard.
The image becomes appropriate to project on a blackboard.
The image becomes appropriate to project on a whiteboard.
The image becomes suitable for movie contents.
The image becomes appropriate to use in a dark room.
Adjustment
The screen becomes brighter.
The screen becomes darker.
Adjustment
Increases the brightness of the dark (black) parts of the screen.
Reduces the brightness of the dark (black) parts of the screen.
Range of adjustment
-31 - +31
Range of adjustment
-31 - +31
ENGLISH - 85