Digital Link; Application Software Supported By The Projector; Disposal; Storing - Panasonic PT-MZ570 Operating Instructions Manual

f When using a laser format bar code reader, take care not to illuminate the bar code reading surface with the
projection light or its reflected light. Doing so may cause bar code reader not to read or misread.
f The Light ID function of the projector is not guaranteed to operate on all devices.

DIGITAL LINK

"DIGITAL LINK" is a technology to transmit the video, audio, Ethernet, and serial control signals using a twisted
pair cable by adding unique functions by Panasonic to the HDBaseT
HDBaseT Alliance.
This projector supports the optional Panasonic DIGITAL LINK output supported device (Model No.: ET-YFB100G,
ET-YFB200G) and peripheral devices by other manufacturers (twisted-pair-transmitters such as the "XTP
transmitter" of Extron Electronics) based on the same HDBaseT
manufacturers that the operation has been verified with this projector, visit the Panasonic website (https://
panasonic.net/cns/projector/). Note that the verification for devices of other manufacturers has been made for the
items set by Panasonic Corporation, and not all the operations have been verified. For operation or performance
problems caused by the devices of other manufacturers, contact the respective manufacturers.

Application software supported by the projector

The projector supports following application software. For details or downloading each application software, visit
the Panasonic website (https://panasonic.net/cns/projector/).
f Logo Transfer Software
This application software transfers the original image, such as company logo, which is projected at the start, to
the projector.
f Smart Projector Control
This application software sets and adjusts the projector connected via LAN using a smartphone or a tablet.
f Multi Monitoring & Control Software
This application software monitors and controls the multiple display devices (projector and flat panel display)
connected to an intranet.
f Early Warning Software
This plug-in software monitors the status of the display devices and their peripherals within an intranet, and
notifies of abnormality of such equipment and detects the signs of possible abnormality. "Early Warning
Software" is preinstalled in the "Multi Monitoring & Control Software". To use the early warning function of
this plug-in software, install "Multi Monitoring & Control Software" in the PC to be used. By enabling the early
warning function, it will notify of the approximate time to replace the consumables for the display devices,
to clean each part of the display devices, and to replace the components of the display devices, allowing to
execute maintenance in advance.
The early warning function can be used by registering maximum of 2048 display devices free of charge for
90 days after installing the "Multi Monitoring & Control Software" into a PC. To continuously use after the 90
days, it is necessary to purchase the license of "Early Warning Software" (ET-SWA100 Series) and perform
the activation. Also, depending on the type of license, the number of display devices that can be registered for
monitoring varies. For details, refer to the Operating Instructions of "Multi Monitoring & Control Software".
f Wireless Manager ME6.4
This application software transmits the computer screen to the projector via wireless LAN or wired LAN.
Simultaneous projection from one computer to multiple projectors, or simultaneous projection from multiple
computers to one projector is possible.
f Plug and Share
This application software makes it possible to project the computer screen with the projector easily by omitting
the selection of the device when connecting the computer via network by pairing a projector and a computer
using the USB memory.
f Wireless Projector
This application software for iOS/Android is used to project files such as PDF or image by transmitting to the
projector via wireless LAN.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal. Also, dispose of the
product without disassembling.

Storing

To store the projector, store in a dry room.
Chapter 1 Preparation — Precautions for use
communication standard formulated by
TM
standard. For the devices of other
TM
ENGLISH - 25