[Dynamic Contrast]; [System Selector] - Panasonic PT-MZ570 Operating Instructions Manual

Table of Contents

Advertisement

[DYNAMIC CONTRAST]

Light adjustment of the light source is performed automatically according to the image to make the contrast
optimum for the image.
1)
Press as to select [DYNAMIC CONTRAST].
2)
Press qw or the <ENTER> button.
f The [DYNAMIC CONTRAST] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1]
[2]
Note
f When the [PROJECTOR SETUP] menu → [LightID] is set to [EXTERNAL CONTROL] or [INTERNAL ID], [DYNAMIC CONTRAST] is set to
[OFF].

[SYSTEM SELECTOR]

The projector will automatically detect the input signal, but you can set the system method manually when an
unstable signal is input. Set the system method matching the input signal.
1)
Press as to select [SYSTEM SELECTOR].
2)
Press the <ENTER> button.
3)
Press as to select a system format.
f Available system formats vary depending on the input signal.
Terminal
<VIDEO IN> terminal
<RGB 1 IN> terminal, <RGB 2
IN> terminal
<HDMI 1 IN> terminal, <HDMI
2 IN> terminal, <DIGITAL
LINK/LAN> terminal
4)
Press the <ENTER> button.
Note
f For details of the types of video signals that can be used with the projector, refer to "List of compatible signals" (x page 218).
f This may not function properly for some connected external devices.
Chapter 4 Settings — [PICTURE] menu
Disables the dynamic contrast function.
Adjusts the light source and compensates signals to a small extent.
Adjusts the light source and compensates signals to a large extent.
Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].
Select [AUTO] normally. ([AUTO] will automatically determine from [NTSC], [NTSC4.43], [PAL],
[PAL-M], [PAL-N], [SECAM], or [PAL60].)
Switch the setting to the appropriate TV signal format.
480/60i, 576/50i, or 576/50p
signal
640 x 480/60 or 480/60p
signal
Other moving image signals
480/60i, 576/50i, 480/60p, or
576/50p signal
Other moving image signals
System format
Select [RGB] or [YC
C
].
B
R
Select [640x480/60], [480/60p YC
Select [RGB] or [YP
P
].
B
R
Select [AUTO], [RGB], or [YC
C
B
Select [AUTO], [RGB], or [YP
P
B
C
], or [480/60p RGB].
B
R
].
R
].
R
ENGLISH - 89

Advertisement

Table of Contents
loading

Table of Contents