Panasonic PT-MZ570 Operating Instructions Manual page 124

4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f Audio is not output in the standby mode when the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to
[ECO].
Setting audio output while using the shutter function
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [IN SHUTTER].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Setting mute mode
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select [MUTE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Setting audio input from a connected device
1) Press as to select [AUDIO SETTING].
2) Press the <ENTER> button.
f The [AUDIO SETTING] screen is displayed.
3) Press as to select item to set in [AUDIO IN SELECT].
[RGB1]
[RGB2]
[VIDEO]
[HDMI1]
[HDMI2]
[DIGITAL LINK]
[NETWORK/USB]
4) Press qw to switch the item.
f The items will switch each time you press the button.
124 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Audio is not output during standby.
Audio is output during standby.
Audio is not output while using the shutter function (shutter: closed).
Audio is output while using the shutter function (shutter: closed).
Audio is output.
Audio is not output.
Sets the audio to output when RGB1 is input.
Sets the audio to output when RGB2 is input.
Sets the audio to output when VIDEO is input.
Sets the audio to output when HDMI1 is input.
Sets the audio to output when HDMI2 is input.
Sets the audio to output when DIGITAL LINK is input.
Sets the audio to output when MEMORY VIEWER, MIRRORING, or Panasonic APPLICATION is
input.