When The Initial Setting Screen Is Displayed - Panasonic PT-MZ570 Operating Instructions Manual

Chapter 3 Basic Operations — Switching on/off the projector

When the initial setting screen is displayed

When the projector is switched on for the first time after purchase, or when the [PROJECTOR SETUP] menu
→ [INITIALIZE] → [ALL USER DATA] is executed, the focus adjustment screen is displayed immediately after
the projection is started, and then the [INITIAL SETTING] screen is displayed. Set them according to the
circumstances.
In other occasions, you can change the settings by menu operations.
If you press the <MENU> button while the [INITIAL SETTING] screen is displayed, you can go back to the
previous screen.
Same operation is available by pressing the <RETURN> button.
Focus adjustment
Adjust the focus to display the menu screen clearly.
Adjustment of the zoom and shift may also be necessary.
For details, refer to "Adjusting the focus, zoom, and lens shift" (x page 68).
1) Press asqw to adjust the focus.
2) Press the <MENU> button to proceed to the initial setting.
Initial setting (display language)
Select the language to show on the screen.
After completed the initial setting, you can change the display language from the [DISPLAY LANGUAGE] menu.
1) Press asqw to select the display language.
2) Press the <ENTER> button to proceed to the initial setting.
LENS
FOCUS
ADJUST
INITIAL SETTING
Қазақша
SELECT
SET
ENTER
1/6
ENGLISH - 61