Power Connection - ZyXEL Communications RGS Series User Manual

3.6 Power Connection

The DC power interface is a 6-pin terminal block with polarity signs on the top panel.
The RGS200-12P can be powered from two power supply (input range 12V – 58V). The DC power
connector is a 6-pin terminal block; there is alarm contact on the middle terminal block.
Refer to Table 1 for the normal operational LED status.
Figure 7 RGS100-5P Series Power Connections
Figure 8 RGS200-12P Series Ground Connections
Note: 1. The DC power should be connected to a well-fused power supply.
Power Connector (6P Terminal Block)
Input DC 12-58V
PWR1 +/- Power Input 1 +/-
PWR2 +/- Power Input 2 +/-
ALM Alarm relay output
21