Quick Installation; Mounting The Rgs Series (Din-Rail) - ZyXEL Communications RGS Series User Manual

3.Quick Installation

3.1 Mounting the RGS Series (DIN-Rail)

Mounting step:
1. Screw the DIN-Rail bracket on with the bracket and screws in the accessory kit.
2. Hook the unit over the DIN rail.
3. Push the bottom of the unit towards the DIN Rail until it snaps into place.
Figure 1 RGS100-5P DIN-Rail Mounting
Figure 2 RGS200-12P DIN-Rail Mounting
14